|
|
|
|
|
* VAT and delivery costs not included |
|
|
|
CRACK MONITORS |
|
TYPES: |
|
For measuring the change in cracks in a same plane. |
|
Displacements in 2 directions. |
|
>Minimum value 0,5 mm. |
|
>Minimum value 0,1 mm. |
|
Displacement in 1 directions. |
|
>Minimum value 0,1 mm. |
|
>Minimum value 0,2 mm. |
|
>Minimum value 0,05 mm. |
|
>Minimum value 0,02 mm. |
|
|
|
For measuring the change in cracks in a different plane. |
|
Displacements in 3 directions. |
|
>Minimum value 0,1 mm. |
|
Displacements in 2 directions. |
|
>Minimum value 0,5 mm. |
|
Displacement in 1 directions. |
|
>Minimum value 0,1 mm. |
|
|
|
Small transparent ruler for measuring cracks. |
|
|
|
Digital gauges. |
|
|
|
Triangular, conical and digital gauges. |
|
|
|
Handle magnifiers with reticle. |
|
|
|
Vitrometer. |
|
|
|
|
|
|
|
|
|
|
|
|
FI103AN, FI103AN-10, FI103AN-50 |
|
|
|
|
|
|
|
|
FI103AN, FI103AN-10, FI103AN-50
Crack monitor 1 direction, resolution of 0,1 mm, measures cracks up to 17 cm, indoor/outdoor use. Crack monitor sheet (80x60mm), ruler (258x18cm). Customizable logo for orders above 100 units,
|
|
|
|
aaaaaaaaaaaaaaaaa |
|
FI103AN
19 €
From 1 to 9 Units.
In Stock |
|
|
|
|
|
|
aaaaaaaaaaaaa
|
|
FI103AN-10
15.9 €
From 10 to 49 Units.
In Stock |
|
|
|
|
|
|
aaaaaaaaaaaaaaa
|
|
FI103AN-50
13.9 €
50 or more Units
Available: 5 days |
|
|
|
|
|
|
DATA SHEET |
|
White color , resistant to bad weather
Crack monitor for measuring the cracks up to 17cm, with vernier scale , accuracy of 0,1 mm.
- Dimensions: body (80x60mm), rule (258x18mm)
- Reading accuracy 0,1 mm (vernier)
- Monitoring the change in cracks in the same plane.
- They can be fixed in place using double-sided self adhesive, glue or screws (supplied)
- It consists of a sliding graduated ruler from 0 to 19 cm in a vernier plate with a vernier reading of 0,1 mm.
- Resistant to bad weather (Doble plastic layer)
|
Example of reading the vernier
|
Exact dimension
|
Vernier
Scale
|
Reading:33 mm |
The pointer of the vernier scale corresponds exactly to a millimetre graduation. In this case, the reading is 33,0 mm.
It can be seen that in the case of an exact reading the last mark on the right of the vernier scale corresponds to a millimetre graduation. In the example of the 33mm reading corresponds to the 42mm.
|
Reading with decimals |
|
Vernier
Scale |
Reading: 42,5 mm |
The pointer of the vernier is between two divisions of mm. In the example between 42 and 43, 42 will be the whole number of mm.
The decimal will be indicated by the vernier line that corresponds to a number of mm of the scale. In the example, the division 5 of the vernier coincides with division 47 of the scale. The reading will be 42,5 mm.
|
|
|
Using the crack monitor monitor
Once the crack monitors have been placed, they should be checked regulary. We recommend to do it after 7, 14, 30, 60 and 90 days.
With all this measurements a register is taken and reference scales and change graphics are produced. These are essential tools to carry out a diagnosis and evaluate the strength of the damage for monitorising a possible change.
Henceforth, we can determinate the urgency of the repair and the best way to face it and, even, if it could be possible, remove the heart of the matter.
Control of vertical movements
First reading: 1/5/2012
|
|
|
|
|
|